#  gosipcmd configuration for poland qfw with example s2 stairs
# format: 
# sfp slave address value [setbit/clearbit]
# -1 for sfp and/or slave will broadcast to all initialized sfps and slaves

#reset logic:
-1 -1 200000 0
-1 -1 200000 1

#Disable Trigger (ON=1 OFF=0)
-1 -1 20004c 0

#Start DAC program
-1 -1 200030 1
-1 -1 200030 0

#set number of TS loop1
#max x"fd" slices in total 
-1 -1 200014 3 

#set number of TS loop2
-1 -1 200018 5

#set number of TS loop3
-1 -1 20001c 2

#::::::::::::::::::::::::::::::::::::
#all numbers = hex / unit = 20ns
#::::::::::::::::::::::::::::::::::::
#set time of TS loop1
#1F4 #10us
#c350 #1ms
#7a120 #10ms
#1e8480 #40ms
#4c4b40 #100ms
#2faf080 #1s
-1 -1 200020 af4

#set time of TS loop2
-1 -1 200024 af4

#set time of TS loop3
-1 -1 200028 af4 

#:::::::::::::::::::::::::::::::::::::
#:::::::::::::::::::::::::::::::::::::
#:::::::::::::::::::::::::::::::::::::
#reset counter on FPGA
#-1 -1 20003c 1
#-1 -1 20003c 0

#internal trigger is on (1) or off (0)
-1 -1 200040 0
# 0 0 200040 1 # enable one master trigger here?
#FESA = Bit 1 (ON=1 OFF=0) MASTER or Slave = BIT 2 (ON=1 OFF=0)
#only one Module should be Master 
-1 -1 200048 0 # all slaves by default
1 0 200048 2 # this one is master

#Offset Measurment (1s mess - time)
-1 -1 200044 0

################
# s2_ini_qfw:
#reset qfw
-1 -1 200010 0
-1 -1 200010 1

#QFW mode 2

-1 -1 200004 2
#program qfw
-1 -1 200008 1
-1 -1 200008 0

#Enable Trigger (ON=1 OFF=0)
-1 -1 20004c 1