void ana_digi3(Int_t nEvents = 1000000, Int_t calMode=0, Int_t calSel=-1, Int_t calSmType=2, Int_t RefSel=1, char *cFileId="MbsTrbThu1715", Int_t iSet=0) { Int_t iVerbose = 1; // Specify log level (INFO, DEBUG, DEBUG1, ...) TString logLevel = "FATAL"; //TString logLevel = "ERROR"; TString logLevel = "INFO"; //TString logLevel = "DEBUG"; //TString logLevel = "DEBUG1"; //TString logLevel = "DEBUG2"; //TString logLevel = "DEBUG3"; FairLogger* log; TString workDir = gSystem->Getenv("VMCWORKDIR"); TString paramDir = workDir + "/macro/tof/beamtime/sep14"; TString ParFile = paramDir + "/unpack_" + cFileId + ".params.root"; TString InputFile = paramDir + "/unpack_" + cFileId + ".out.root"; TString OutputFile = paramDir + "/digi_" + cFileId + ".out.root"; TList *parFileList = new TList(); TObjString mapParFile = paramDir + "/parMapGsiSep14.txt"; parFileList->Add(&mapParFile); TString TofGeo="v14a"; TString FId=cFileId; if(FId.Contains("tsu")) { cout << FId << ": Analyse TSU counter "<< endl; TofGeo="v14a_tsu"; } TObjString tofDigiFile = workDir + "/parameters/tof/tof_" + TofGeo + ".digi.par"; // TOF digi file parFileList->Add(&tofDigiFile); TObjString tofDigiBdfFile = paramDir + "/tof.digibdf.par"; parFileList->Add(&tofDigiBdfFile); TString geoDir = gSystem->Getenv("VMCWORKDIR"); TString geoFile = geoDir + "/geometry/tof/geofile_tof_" + TofGeo + ".root"; TFile* fgeo = new TFile(geoFile); TGeoManager *geoMan = (TGeoManager*) fgeo->Get("FAIRGeom"); if (NULL == geoMan){ cout << " FAIRGeom not found in geoFile"<GetTopVolume(); master->SetVisContainers(1); master->Draw("ogl"); } // ----- Reconstruction run ------------------------------------------- FairRunAna *run= new FairRunAna(); run->SetInputFile(InputFile.Data()); //run->AddFriend(InputFile.Data()); run->SetOutputFile(OutputFile); gLogger->SetLogScreenLevel(logLevel.Data()); // ========================================================================= // === Mapping === // ========================================================================= TMbsMappingTof* tofMapping = new TMbsMappingTof("Tof Mapping", iVerbose); // run->AddTask(tofMapping); CbmTofTestBeamClusterizer* tofTestBeamClust = new CbmTofTestBeamClusterizer("TOF TestBeam Clusterizer",iVerbose, kFALSE); //tofTestBeamClust->SetCalParFileName("MbsTrbBeamtofTestBeamClust.hst.root"); tofTestBeamClust->SetCalMode(calMode); tofTestBeamClust->SetCalSel(calSel); tofTestBeamClust->SetCaldXdYMax(2.); // geometrical matching window in cm tofTestBeamClust->SetdTRefMax(50000.); // obsolete, not used any more tofTestBeamClust->SetCalSmType(calSmType); // select detectors for walk correction //tofTestBeamClust->SetTRefDetId(20486); //0x00005006; big Diamond //tofTestBeamClust->SetTRefDetId(8214); //0x00002016; Plastic 1 //tofTestBeamClust->SetTRefDetId(8198); //0x00002006; Plastic 0 tofTestBeamClust->SetTRefId(RefSel); // reference trigger for offset calculation tofTestBeamClust->SetTotMax(10000.); // Tot upper limit for walk corection //tofTestBeamClust->SetTotMin(1.); //(12000.); // Tot lower limit for walk correction tofTestBeamClust->SetTotPreRange(5000.); // effective lower Tot limit in ps from peak position tofTestBeamClust->SetTotMean(2000.); // Tot calibration target value in ps tofTestBeamClust->SetMaxTimeDist(500.); // default cluster range in ps Int_t calSelRead = calSel; if (calSel<0) calSelRead=0; TString cFname=Form("%s_%02d_%01dtofTestBeamClust.hst.root",cFileId,calMode,calSelRead); tofTestBeamClust->SetCalParFileName(cFname); TString cAnaFile=Form("%s_%1d_tofAnaTestBeam.hst.root",cFileId,iSet); if(iSet==0){ tofTestBeamClust->SetDutId(6.); } else { tofTestBeamClust->SetDutId(8.); } switch (calMode) { case 0: // initial calibration tofTestBeamClust->SetTotMax(100000.); //tofTestBeamClust->SetTotMin(1.); tofTestBeamClust->SetTRefDifMax(3000000000000.); // in ps // special setting for SmType=1 tofTestBeamClust->PosYMaxScal(2000.); // in % of length tofTestBeamClust->SetMaxTimeDist(0.); // no cluster building break; case 1: // save offsets, update walks tofTestBeamClust->SetTRefDifMax(5000.); // in ps tofTestBeamClust->PosYMaxScal(1.0); // in % of length break; case 11: tofTestBeamClust->SetTRefDifMax(4000.); // in ps tofTestBeamClust->PosYMaxScal(1.0); // in % of length break; case 21: tofTestBeamClust->SetTRefDifMax(3000.); // in ps tofTestBeamClust->PosYMaxScal(1.0); // in % of length break; case 31: tofTestBeamClust->SetTRefDifMax(2000.); // in ps tofTestBeamClust->PosYMaxScal(1.0); // in % of length break; case 41: tofTestBeamClust->SetTRefDifMax(1000.); // in ps tofTestBeamClust->PosYMaxScal(0.8); // in % of length break; case 51: tofTestBeamClust->SetTRefDifMax(700.); // in ps tofTestBeamClust->PosYMaxScal(0.7); // in % of length break; case 61: tofTestBeamClust->SetTRefDifMax(500.); // in ps tofTestBeamClust->PosYMaxScal(0.7); // in % of length break; case 71: tofTestBeamClust->SetTRefDifMax(400.); // in ps tofTestBeamClust->PosYMaxScal(0.6); // in % of length break; case 2: // time difference calibration case 3: // time offsets tofTestBeamClust->SetTRefDifMax(2000000000000.); // in ps tofTestBeamClust->PosYMaxScal(1000.); //in % of length tofTestBeamClust->SetMaxTimeDist(0.); // no cluster building break; case 12: case 13: tofTestBeamClust->SetTRefDifMax(1000000000000.); // in ps tofTestBeamClust->PosYMaxScal(100.); //in % of length break; case 22: case 23: tofTestBeamClust->SetTRefDifMax(50000000000.); // in ps tofTestBeamClust->PosYMaxScal(50.); //in % of length break; case 32: case 33: tofTestBeamClust->SetTRefDifMax(2500000000.); // in ps tofTestBeamClust->PosYMaxScal(20.); //in % of length break; case 42: case 43: tofTestBeamClust->SetTRefDifMax(160000000.); // in ps tofTestBeamClust->PosYMaxScal(10.); //in % of length break; case 52: case 53: tofTestBeamClust->SetTRefDifMax(8000000.); // in ps tofTestBeamClust->PosYMaxScal(4.); //in % of length break; case 62: case 63: tofTestBeamClust->SetTRefDifMax(5000000.); // in ps tofTestBeamClust->PosYMaxScal(4); //in % of length break; case 72: case 73: tofTestBeamClust->SetTRefDifMax(200000.); // in ps tofTestBeamClust->PosYMaxScal(4.0); //in % of length break; case 82: case 83: tofTestBeamClust->SetTRefDifMax(1000.); // in ps tofTestBeamClust->PosYMaxScal(0.8); //in % of length break; case 92: case 93: tofTestBeamClust->SetTRefDifMax(600.); // in ps tofTestBeamClust->PosYMaxScal(0.8); //in % of length break; case 4: // velocity dependence (DelTOF) tofTestBeamClust->SetTRefDifMax(5000.); // in ps tofTestBeamClust->PosYMaxScal(1.5); //in % of length break; case 14: tofTestBeamClust->SetTRefDifMax(2500.); // in ps tofTestBeamClust->PosYMaxScal(1.); //in % of length break; case 24: tofTestBeamClust->SetTRefDifMax(1000.); // in ps tofTestBeamClust->PosYMaxScal(0.8); //in % of length break; case 64: tofTestBeamClust->SetTRefDifMax(500.); // in ps tofTestBeamClust->PosYMaxScal(0.7); //in % of length break; default: cout << " Calib mode not implemented! stop execution of script"<AddTask(tofTestBeamClust); CbmTofAnaTestbeam* tofAnaTestbeam = new CbmTofAnaTestbeam("TOF TestBeam Analysis",iVerbose); switch(cFileId){ case "MbsTrbSun2325": tofAnaTestbeam->SetDXMean(0.09); tofAnaTestbeam->SetDYMean(-0.06); tofAnaTestbeam->SetDTMean(0.); // in ps tofAnaTestbeam->SetDXWidth(0.59); tofAnaTestbeam->SetDYWidth(0.47); tofAnaTestbeam->SetDTWidth(220.); // in ps break; case "MbsTrbMon0153": tofAnaTestbeam->SetDXMean(0.54); tofAnaTestbeam->SetDYMean(-0.02); tofAnaTestbeam->SetDTMean(0.); // in ps tofAnaTestbeam->SetDXWidth(0.6); tofAnaTestbeam->SetDYWidth(0.55); tofAnaTestbeam->SetDTWidth(100.); // in ps break; case "MbsTrbSat1805": switch (iSet) { case 0: // lower part of setup: HD-P2 tofAnaTestbeam->SetDXMean(0.13); tofAnaTestbeam->SetDYMean(-0.78); tofAnaTestbeam->SetDTMean(6.); // in ps tofAnaTestbeam->SetDXWidth(0.40); tofAnaTestbeam->SetDYWidth(0.40); tofAnaTestbeam->SetDTWidth(80.); // in ps tofAnaTestbeam->SetCalParFileName(cAnaFile); tofAnaTestbeam->SetMul4Max(1); // Max Multiplicity in HDRef - RPC tofAnaTestbeam->SetCh4Sel(8.); // Center of channel selection window tofAnaTestbeam->SetDCh4Sel(4.); // Width of channel selection window tofAnaTestbeam->SetPosY4Sel(0.2); // Y Position selection in fraction of strip length tofAnaTestbeam->SetMulDMax(1.); // Max Multiplicity in Diamond tofAnaTestbeam->SetDTDia(500.); // Time difference to additional diamond tofAnaTestbeam->SetCorMode(1); // 1 - DTD4, 2 - X4 tofAnaTestbeam->SetDut(3); // Device under test tofAnaTestbeam->SetMrpcRef(4); // Reference RPC tofAnaTestbeam->SetPlaSelect(0); // Select attached plastics (0 - HD-P2, 2 - Buc2013) break; case 1: // upper part of setup: Buc2013 - BucRef tofAnaTestbeam->SetDXMean(-0.04); tofAnaTestbeam->SetDYMean(0.); tofAnaTestbeam->SetDTMean(0.); // in ps tofAnaTestbeam->SetDXWidth(0.1); tofAnaTestbeam->SetDYWidth(0.5); tofAnaTestbeam->SetDTWidth(80.); // in ps tofAnaTestbeam->SetCalParFileName(cAnaFile); tofAnaTestbeam->SetMul4Max(1.); // Max Multiplicity in Ref - RPC tofAnaTestbeam->SetCh4Sel(38.); // Center of channel selection window tofAnaTestbeam->SetDCh4Sel(4.); // Width of channel selection window tofAnaTestbeam->SetMulDMax(1.); // Max Multiplicity in Diamond tofAnaTestbeam->SetCorMode(2); // 1 - DTD4, 2 - X4 tofAnaTestbeam->SetDut(6); // Device under test tofAnaTestbeam->SetMrpcRef(1); // Reference RPC tofAnaTestbeam->SetPlaSelect(2); // Select attached plastics (0 - HD-P2, 2 - Buc2013) break; default: ; } // end of different subsets for Sat1805 break; case "MbsTrbSun1205_tsu": switch (iSet) { case 0: // lower part of setup: TSU strip tofAnaTestbeam->SetDXMean(-0.03); tofAnaTestbeam->SetDYMean( 0.); tofAnaTestbeam->SetDTMean(0.); // in ps tofAnaTestbeam->SetDXWidth(0.40); tofAnaTestbeam->SetDYWidth(0.40); tofAnaTestbeam->SetDTWidth(80.); // in ps tofAnaTestbeam->SetCalParFileName(cAnaFile); tofAnaTestbeam->SetMul4Max(1.); // Max Multiplicity in HDRef - RPC tofAnaTestbeam->SetCh4Sel(8.); // Center of channel selection window tofAnaTestbeam->SetDCh4Sel(7.); // Width of channel selection window tofAnaTestbeam->SetPosY4Sel(0.4); // Y Position selection in fraction of strip length tofAnaTestbeam->SetMulDMax(1.); // Max Multiplicity in Diamond tofAnaTestbeam->SetDTDia(500.); // Time difference to additional diamond tofAnaTestbeam->SetCorMode(1); // 1 - DTD4, 2 - X4 tofAnaTestbeam->SetDut(3); // Device under test tofAnaTestbeam->SetMrpcRef(4); // Reference RPC tofAnaTestbeam->SetPlaSelect(0); // Select attached plastics (0 - HD-P2, 2 - Buc2013) break; case 1: // TSU pad tofAnaTestbeam->SetDXMean(-0.15); tofAnaTestbeam->SetDYMean(-2.7); tofAnaTestbeam->SetDTMean(13.9); // in ps tofAnaTestbeam->SetDXWidth(2.63); tofAnaTestbeam->SetDYWidth(2.49); tofAnaTestbeam->SetDTWidth(93.); // in ps tofAnaTestbeam->SetCalParFileName(cAnaFile); tofAnaTestbeam->SetMul4Max(1.); // Max Multiplicity in HDRef - RPC tofAnaTestbeam->SetMulDMax(1.); // Max Multiplicity in Diamond tofAnaTestbeam->SetCorMode(1); // 1 - DTD4, 2 - X4 tofAnaTestbeam->SetDut(8); // Device under test tofAnaTestbeam->SetMrpcRef(1); // Reference RPC tofAnaTestbeam->SetPlaSelect(2); // Select attached plastics (0 - HD-P2, 2 - Buc2013) break; default: ; } break; default: tofAnaTestbeam->SetDXMean(0.); tofAnaTestbeam->SetDYMean(0.); tofAnaTestbeam->SetDTMean(0.); // in ps tofAnaTestbeam->SetDXWidth(0.5); tofAnaTestbeam->SetDYWidth(0.5); tofAnaTestbeam->SetDTWidth(100.); // in ps tofAnaTestbeam->SetCalParFileName(cAnaFile); tofAnaTestbeam->SetMul4Max(10.); // Max Multiplicity in HDRef - RPC tofAnaTestbeam->SetMulDMax(10.); // Max Multiplicity in Diamond tofAnaTestbeam->SetCorMode(1); // 1 - DTD4, 2 - X4 tofAnaTestbeam->SetDut(2); // Device under test tofAnaTestbeam->SetMrpcRef(4); // Reference RPC tofAnaTestbeam->SetPlaSelect(0); // Select attached plastics (0 - HD-P2, 2 - Buc2013) } run->AddTask(tofAnaTestbeam); // ========================================================================= /* CbmTofOnlineDisplay* display = new CbmTofOnlineDisplay(); display->SetUpdateInterval(1000); run->AddTask(display); */ // ----- Parameter database -------------------------------------------- FairRuntimeDb* rtdb = run->GetRuntimeDb(); Bool_t kParameterMerged = kTRUE; FairParRootFileIo* parIo2 = new FairParRootFileIo(kParameterMerged); parIo2->open(ParFile.Data(), "UPDATE"); parIo2->print(); rtdb->setFirstInput(parIo2); FairParAsciiFileIo* parIo1 = new FairParAsciiFileIo(); parIo1->open(parFileList, "in"); parIo1->print(); rtdb->setSecondInput(parIo1); rtdb->print(); rtdb->printParamContexts(); // FairParRootFileIo* parInput1 = new FairParRootFileIo(); // parInput1->open(ParFile.Data()); // rtdb->setFirstInput(parInput1); // ----- Intialise and run -------------------------------------------- run->Init(); cout << "Starting run" << endl; run->Run(0, nEvents); // ------------------------------------------------------------------------ TString Display_Status = "pl_over_cluSel.C"; gROOT->LoadMacro(Display_Status); switch (iSet) { case 0: gInterpreter->ProcessLine("pl_over_cluSel(1,5,1)"); gInterpreter->ProcessLine("pl_over_cluSel(1,3)"); gInterpreter->ProcessLine("pl_over_cluSel(0,4)"); break; case 1: gInterpreter->ProcessLine("pl_over_cluSel(1,5,1)"); gInterpreter->ProcessLine("pl_over_cluSel(3,8)"); gInterpreter->ProcessLine("pl_over_cluSel(2,1)"); break; } }